Skip to content
Focus Four: Electrocution Hazard Recognition, slide 1: Recognize Any Hazard(s)?
1 / 20

Focus Four: Electrocution Hazard Recognition

OSHA's official Construction Focus Four slide deck on electrocution hazards: overhead lines, contact with energized sources, improper use of cords and tools.

Slide text

· 20 slides · by U.S. Department of Labor, OSHA

The words on each slide as the author wrote them, read from the file by software so they can be searched. Layout, pictures and tables are not shown here: the slides above and the download are the original.

  1. Slide 1

    Recognize Any Hazard(s)?

  2. Slide 2

    Yes

    • No employer shall permit a worker to work in such proximity to any part of an electric power circuit that the worker could contact the electric power circuit in the course of work
  3. Slide 3

    Recognize Any Hazard(s)?

  4. Slide 4

    Yes

    • Crossing electrical line must be supported, protected or removed to safeguard workers
  5. Slide 5

    Recognize Any Hazard(s)?

  6. Slide 6

    Yes

    • Spliced electrical extension cords. Extension cords should be marked DO NOT USE. Also, bad housekeeping, trip hazard and unprotected hole in photograph
  7. Slide 7

    Recognize Any Hazard(s)?

  8. Slide 8

    YES

    • 1. No GFCI
    • 2. System not grounded
    • 3. Openings where conductors entered not closed
    • 4. No cover on boxes
    • 5. Panel boards were not dead front
  9. Slide 9

    Recognize Any Hazard(s)?

  10. Slide 10

    YES

    • Electric drill flexible cord was spliced to a non-flexible conductor with damaged insulation
  11. Slide 11

    Recognize Any Hazard(s)?

  12. Slide 12

    Yes

    • Scaffold was erected 4 ½ feet from 7.2 kV power lines
  13. Slide 13

    Recognize Any Hazard(s)?

  14. Slide 14

    YES

    • Continuous path to ground not maintained; multiple cords used for fixed equipment
  15. Slide 15

    Recognize Any Hazard(s)?

  16. Slide 16

    YES

    • Employer was operating a stand fan without grounding protection
  17. Slide 17

    Recognize Any Hazard(s)?

  18. Slide 18

    Yes

    • Conductors entering boxes, cabinets, or fittings shall be protected from abrasion. Openings through which conductors enter shall be effectively closed
  19. Slide 19

    Recognize Any Hazard(s)?

  20. Slide 20

    Yes

    • Flexible cords and cables may pass through doorways or other pinch points, if protection is provided to avoid damage

More on Electrocution

Esc