Fire watch duties during hot work; written for shipyards but the checklist applies to any welding or cutting job.
Page text
· 2 pages · by U.S. Department of Labor, OSHA
The words on each page as the author wrote them, read from the file by software so they can be searched. Layout, pictures and tables are not shown here: the pages above and the download are the original.
- Page 1
CARD
- QUICK
- TM
- Fire Watch Safety during Hot Work in Shipyards
- Workers assigned as fire watch are the first line of defense in protecting other workers and property from harm during hot work. Hot work includes any activity involving riveting, welding, burning, grinding or use of powder-actuated tools or similar fire- or sparkproducing operations (29 CFR 1915.11(b)).
- OSHA requires employers to:
- Provide workplaces that are free of recognized hazards.
- Select and provide required personal protective equipment at no cost to workers (29 CFR 1915 Subpart I).
- Train fire watch workers about job hazards, including how to fight fires at their incipient (beginning) stage (29 CFR 1915.508(c)).
- Do not perform other duties in combination with fire watch activities while hot work is in progress (29 CFR 1915.504(c)).
- For more information:
- Occupational
- Safety and Health
- Administration
- U.S. Department of Labor
- www.osha.gov (800) 321-OSHA (6742)
- OSHA 3494-02N-12 Online Version
- Safe Work Practices
- Stay alert and be responsible to actively prevent and fight any incipient stage fires.
- Page 2
CARD
- QUICK
- TM
- Have a clear view of and immediate access to all areas of hot work (29 CFR 1915.504(c)(2)(i)).
- Have the proper fire extinguisher or charged water hose ready for use.
- Ensure that you have the ability to communicate with workers in the area of hot work (29 CFR
- 1915.504(c)(2)(ii)).
- Isolate or cover combustible materials that cannot be removed with fire-resistant blankets and flameretardant chemical gels or solutions. Wet down the area surrounding hot work.
- Do not abandon the hot work area during breaks or interruptions, or at the end of work shifts, unless properly relieved.
- Continue fire watch duties for at least 30 minutes after completing hot work, unless released by your employer after a site inspection (29 CFR
- 1915.504(c)(2)(iv)).
- Follow all confined space entry and hot work requirements established by your employer, the shipyard competent person (SCP), National Fire Protection Association (NFPA)-certified Marine Chemist, or Coast Guard authorized person
- (29 CFR 1915.12 and 29 CFR 1915.14).
- Shut down any hot work activity deemed unsafe and take the appropriate corrective measures to restore and maintain safe conditions. Immediately address all concerns or refer questions to your employer or the SCP (29 CFR 1915.504(c)(2)(iii)).
- REMEMBER
- Attempt to extinguish any incipient stage fires consistent with the fire protection equipment provided and your training (29 CFR 1915.504(c)(2)(vi)).
- If a fire gets beyond the incipient stage, alert workers and activate the alarm (29 CFR 1915.504(c)(2)(vii) and (viii)), then exit the area.
- For more information:
- Occupational
- Safety and Health
- Administration
- U.S. Department of Labor
- www.osha.gov (800) 321-OSHA (6742)
